BPCSL - RED GUN AND BRUSHING TYPE BOUNDARY TREE (SU

  • MSDS: BPCSL
  • Manufacturer: NELSON PAINT CO
  • Product Name: RED GUN AND BRUSHING TYPE BOUNDARY TREE (SU
  • National Stock Number: 8010-00N025282
Product Identification

Product ID:RED GUN AND BRUSHING TYPE BOUNDARY TREE (SU
MSDS Date:03/01/1988
FSC:8010
NIIN:00N025282
MSDS Number: BPCSL

Responsible Party
NELSON PAINT CO
ONE NELSON DR
KINGSFORD, MI 49801
US

Emergency Phone: 906-774-5566

Info Phone: 906-774-5566

Cage: 17833

Contractor
NELSON PAINT CO OF MICHIGAN INC
2040 KINGSFORD, MI 49802-2040 US

Telephone: 906-774-5566

Cage: 17833

Ingredients

LIGROINE; (VM&P NAPHTHA)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 48%

OSHA PEL 300 PPM;400 PPM STEL

ACGIH TLV: 300 PPM

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:UNDER NORMAL HANDLING IN OUTDOOR USE,
PRODUCT IS NOT HAZARDOUS. PRODUCT CAN BE HARMFUL TO HEALTH IF FUMES
ARE INHALED IN UNUSUAL LEVELS, OR PAINT IS INGESTED. THE SOLVENT
PORTION IS IRRITANT TO THE EY ES AND CAN BE IRRITATING TO THE SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS OR ALLERGIES.
SENSITIVE SKIN: SKIN ALLERGIES.

First Aid

First Aid:INHAL: REMOVE PERSON TO FRESH AIR. CALL PHYSICIAN. INGEST:
CALL PHYSICIAN IMMEDIATELY. DO NOT INDUCE VOMITING. EYES: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. USE EYEWASH, EYEDROPS. SKIN:
REMOVE PAINT WITH SOAP AND WATER OR MINERAL OIL AS SOON AS
POSSIBLE, APPLY SKIN LOTION IF NEEDED.

Fire Fighting

Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:0.7%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS WILL BUILD PRESSURE
WHEN HEATED. WATER MAY BE USED TO COOL UNRUPTURED CONTAINERS.

Accidental Release

Spill Release Procedures:COLLECT IN ABSORBENT MATERIAL. REMOVE ALL
SOURCES OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE INDOORS AT 40 TO 90F. DO NOT
STORE CLOSE TO FURNACE, OTHER HEAT SOURCES. KEEP CONTAINERS TIGHTLY
CLOSED WHEN NOT IN USE.
Other Precautions:DO NOT INHALE MIST/VAPOR. APPLY W/BACK TO WIND. DO
NOT TAKE INTERNALLY. AVOID CONT W/EYES & SKIN. IF SPILLED ON CLTHG,
REMOVE CLTHG & WASH BEFORE USING AGAIN. DO NOT INCIN
EMPTY/PARTIALLY FILLED CNTNR S. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:WHEN APPLIED UNDER WINDY CONDITIONS, USE NIOSH/
MSHA APPROVED RESPIRATOR OR FACE MASK.
Ventilation:PRODUCT USED OUTDOORS.
Protective Gloves:PROTECTIVE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USING; BEFORE
SMOKING OR EATING.
Supplemental Safety and Health
MFR PART NO: MARKING PAINT, E&I-29-11.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:310F,154C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:54

Stability

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME.
Hazardous Decomposition Products:COMBUSTION CAN PRODUCE CO.

Disposal

Waste Disposal Methods:MUST FOLLOW LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.